Ground loop hum?
This should be easy enough but I have developed a Hum I have not encountered before. Only when I connect my Q-10 to the Tascam m-3500's line or tape in's does it occur. I have eliminated everything else and it persists. I even plugged the two units in to seperate circuits. The Mixer and the Q-10(and computer) do not hum on their own only when combined and even with all of the rack mount gear unplugged and it's extremely annoying. I do not believe its recording into cakewalk because I do not hear it if I bypass the console with the headphones directly into the Q-10 after recording a track. Also it is not a steady hum, more of a rumbling low hertz noise. Anyone? ..... Thanks Matt
If either of them use Wallwarts then check then out, they are liable to cause interference. I always try to use the type where the plug and transformer are seperate, they seem to be a lot quieter.
Also check whether they are pro or consumer output, that might need to be adjusted.
Also check whether they are pro or consumer output, that might need to be adjusted.