Need help with Korg T3 instrument definition

This forum is dedicated to Sonar discussions.

Need help with Korg T3 instrument definition

Postby madmix » Sun Apr 24, 2005 1:11 pm

Hi All,

I have been having trouble getting my Korg T3 synth to properly switch banks through Sonar (using an ins file). I have downloaded the one on the cakewalk site, as well as a couple of others but when I use Sonar to select any patches on my T3's B bank, all that happens is that the correponding patch # on the A bank will be selected. I have the T3 set to combi mode and I am setting the Sonar track MIDI channel to 2 or above (the T3 will respond to program change data on MIDI channel 1 by switching combis). I have tried bank select method 0 and 3. Here is the instrument definition file that I have tried so far. Any help would be appreciated:

Thanks!

Ken

file:

; ----------------------------------------------------------------------

.Patch Names


[Korg T3 Bank A]
0=A 00 Aeroglide
1=A 01 Piano 16'
2=A 02 Brass 1
3=A 03 Ooh/Ahh
; patchlist truncated by Ken for space.

[Korg T3 Bank B]
0=B 00 One World
1=B 01 Piano2 16'
2=B 02 Alto Sax
3=B 03 Spectrum 2
; patchlist truncated by Ken for space.

; ----------------------------------------------------------------------

.Note Names


[Korg T3 Drums]
35=Timpani
36=Pro BD
37=Kick 3
; truncated by ken for space.

; ----------------------------------------------------------------------

.Instrument Definitions


[Korg T3]
BankSelMethod=3
Patch[0]=Korg T3 Bank A
Patch[1]=Korg T3 Bank B
Patch
=Korg T3 Bank A
Key[0,9]=Korg T3 Drums
Key[1,9]=Korg T3 Drums
Drum[0,9]=1
Drum[1,9]=1
madmix
 
Posts: 2
Joined: Sun Apr 24, 2005 1:09 pm

Re: Need help with Korg T3 instrument definition

by Sponsor

Forum Sponsor
 

Postby Dr Sax » Mon May 02, 2005 5:59 am

CHeck you PM's. I have a suggestion there.
Dr Sax
 
Posts: 4
Joined: Wed Apr 13, 2005 4:36 am

T# not responding properly to bank change messages

Postby madmix » Mon May 02, 2005 12:26 pm

I've tried everything. See this post:

http://www.cakewalk.com/forum/tm.asp?m=446239

If you can offer any suggestions, I'd be indebted. I think the T3 just can't do bank changes via MIDI (least not from combi or sequencer mode).

Ken
madmix
 
Posts: 2
Joined: Sun Apr 24, 2005 1:09 pm

Re: Need help with Korg T3 instrument definition

Postby kellyS » Fri Feb 10, 2012 6:39 am

I'm a fan of credit unions. You should be able to find one where someone will sit with you and help or discuss how to make the transition smooth. Even if you don't choose them, the information will still be helpful. Credit unions can organize activities to educate members in the use of money that gives them greater control over the management of their financial affairs. Do you know that several months ago, an internet campaign for “Bank Transfer Day” started, which aimed to persuade people to switch their banks. The event itself was not incredibly productive, but it is estimated that more than 1 million people switched banks after Bank Transfer Day. Source of article: http://personalmoneynetwork.com/moneybl ... transfers/
kellyS
 
Posts: 1
Joined: Fri Feb 10, 2012 6:30 am

Need help with Korg T3 instrument definition

Postby RomalaG.Mot » Mon Apr 10, 2017 7:26 am

I want to write data into a file on my CASIO fx-9860g and then read the data from the file with a calculator program. I dont have my manual any more, so I need somebody to tell me how this is done. Thanks
Part 1: create the file
Part 2: the program syntax to read the data from the file
Any help appreciated.
RomalaG.Mot
 
Posts: 19
Joined: Fri Mar 31, 2017 8:33 am
Location: Japan



Similar topics


Return to General Sonar - X1, X2, Producer, Home Studio

Who is online

Users browsing this forum: No registered users and 1 guest

cron

Music Engravers and Music Copyists
   Finale - Sibelius - Cakewalk - Archives - Cakewalk Books - Contact


Copyright © 1994 - 2018 by C.M. Press, LLC