SpectraFX axis assignment?

This forum is dedicated to Sonar discussions.
eelucid8
Posts: 2
Joined: Thu Jul 26, 2007 2:06 am

Post by eelucid8 » Thu Jul 26, 2007 2:16 am

Hello friends!
SpectraFX seems cool as all-get-out. I've applied the Phased Wah to a drum loop and I've set the loop to repeat on the measure. BUT... while the effect has obviously been applied to the sound, I can't hear a damn thing change even though the X and Y axis are moving around. It just sounds like a Phased Wah that's not changing at all. There MUST be a way to assign what X and Y control within the given effect, am I wrong? Furthermore, ANY effect I put on the loop with SpectraFX does the same thing. Applies a static effect and doesn't seem to change at all even though the X and Y axis are in motion. HELP!
-WS


eelucid8
Posts: 2
Joined: Thu Jul 26, 2007 2:06 am

Post by eelucid8 » Thu Jul 26, 2007 4:08 pm

Hi there...
Oh. I had the FX output knob on the left cranked to 100%. You can only hear the effect if the fx output is 99% or less (pref 50%). My question still stands though if there's anyway to assign what X and Y are; I assume that since there's nothing about it in the Help section that there is no such control. Still a great plug-in though.
-WS

Post Reply