Cakewalk Forum: Message Boards: Technical Issues
|
ARCHIVES
Please note you are viewing an archive of the old board system and therefore you will not be able to post to these message. We have put a new board system in place and are leaving
these old messages in place for archive purposes only. There are several new features which you will all enjoy
with the new system so please visit the New Forums.
Please let us know if you have any problems with this new system.
|
|
|
controller surface?want to change from track 1 to 3
Technical Issues Board |
Title: controller surface?want to change from track 1 to 3 |
Posted By: Woody |
E-mail: dims1@yahoo.com |
Date: 07/14/2003 at 19:49:14 |
Message:Hi, I talked to Evolution about this and they said it can be done but is harder to set up with Sonar than other aps and I should contact Sonar tech to find out how....yea right!:-)
So hopefully someone has done this....nothing in Power Book, search or Sonar help files....
I want to be able to change the track that the control surface is pointing at. Sonar let's you set up a group of tracks (1-6,7-12,8-16) and you can move right or left to a set of tracks.... Or you can set up so the controller can move right or left one track at a time.....
I want to be able to be in say track one and in the control surface, enter something....like a number to switch to track 3 or 7 or any one of 16 or 20 tracks. This is so I can use the same set of knobs/sliders and buttons for each track.
Does anyone know how to set up sonar to do this? Thanks, Woody
|
Copyright © 2002-20013 by C. M. Press, LLC. |